Specific knowhow
Unique products
Service and support
Costs savings
Improving safety/environment
Specific knowhow
Unique products
Service and support
Costs savings
Improving safety/environment
Sampling products:
Isokinetic probe samplers are suitable for crude oil and liquid hydrocarbons. The probes comply all to the ISO 3171, ASTM D 4177, API 8.2 and IP 6.2. Available for pipe diameters of 4" up to 52". We have three different control mechanisms: hydraulic, pneumatic or electrical.
More info on hydraulic
More info on pneumatic
More info on electrical
Isokinetic cell samplers are suitable for crude oil and liquid hydrocarbons. The cell samplers comply all with the ISO 3171, ASTM D 4177, API 8.2 and IP 6.2. The cell samplers are designed for the installation in bypass analysing loops. We have three different control mechanisms: hydraulic, pneumatic or electrical.
More info on hydraulic
More info on pneumatic
More info on electrical
These unique pneumatic designed samplers suitable for sampling hydrocarbon gasses up to 200 bars. The G5 sampling system uses a pressure balanced system which increases the lifetime of doing any maintenance drastically. The materials used are suitable for heavy corrosive environments. The G5 samplers are designed for installation in bypass or analyses loops and has a 1/8" NPT fitting.
More info
Manifold samplers for crude and bunker oil are designed to take samples flow proportional on a ship. Manifold samplers are only useful if they comply with the homogeneity requirements stated in the ISO 3171, API 8.2 and IP 6.2 sampling standards.
More info.
These mixers makes adequate mixing possible for pipelines of 12” and higher independent of the flowrate. Furthermore, these mixers have a low pressure drop compared to static mixers which saves a lot of energy.
More info.
Fixed and retractable loop extractors for bypass analyse loops are all designed according to the international sampling standards. The extractor uses an unique patented inlet in order to get a better representative signal.
More info
Depending upon the batch size and/or type of product we have different types of sample receivers to store the samples taken. The receivers are resistant to high and low vapour pressures and contain the fittings needed for mixing equipment.
Receiver for crude oil and refined products
Receiver for gasses and liquids with high pressures
Receiver station which determines based upon the weight if its full or not
These user friendly control systems are capable of the optimal control of the sampling systems and have all the functions needed to comply with the ISO, API and IP sampling standards.
More information